Stainless Steel Evapco Evaporative Condenser Ammonia / R22 / R404a Refrigerant Liquid
Closed type stainless steel Ammonia evaporative condenser ,It is the type of cooling tower placed the heat exchange tube inner the tower to the then ensure the cooling effect by circulation of air, spray water and circulating water. Spray water wraped around the heat exchange tube, the heat of the water inner tube is transfered to the spary water throught the wall of Heat exchange tube and Forming steam, the steam is discharged by fans. Almost Steam is recycling by drift eliminator , Re-condense into water and flow into the water channel. The filling cooling the spary water twice time , impoved the cooling effect and reduce the Scaling in outer wall of heat exchange tube.It can ensure the water can't be pulluted because of the close circulation and protect well the main equipment 's efficient operation and improve the service life. If the low temperature outside, can stop spray water system to save water, Closed cooling tower in the iron and steel metallurgy, power electronics, mechanical processing, air conditioning systems and other industries, Aerospace, electronics, instrumentation, textile, refrigeration unit, casting, forging, quenching liquid, melting furnace, mold, continuous casting machine, rolling mill, heating furnace, electric arc furnace, central air conditioning, heat pump, air compressor, hydraulic oil Machine and other fields have been widely used.
YZT-1840F Specifications
| |
| Heat Reject :1840 kw |
| Gas Filling Rate :212 kg |
| Power of fan :4× 4.0 kw |
| Blowing rate: 4× 45000 m3/h |
| Spray Pump’s Delivery Lift :10 m |
| Spray Pump’s Power : 4.0 kw |
| Spray Water Flow Rate : 180 m3/h |
| Drift Loss : ≤0.001% |
| Design Pressure: 1.98 Mpa |
| Tested Pressure: 2.5 Mpa (Pneumatically tested 3 times @ 2.5 Mpa) |
| Operation Work Pressure: 0.15—0.45 Mpa |
| Inet/ Outnet: 2*DN 100mm/ 2*DN 100mm |
| DN100:Liquid outlet (Please specify adopted screw standards) |
| DN100:Air inlet (Please specify adopted screw standards) |
| Compensation water pipe: DN 25 mm |
| Discharge pipe: DN 50 mm |
| Overflow pipe: DN 80 mm |
| Shipping Weight: 8830 kg |
| Operating Weight:14730kg |
| 7460mm×2200mm×4730mm (L*W*H) |
1. Three anti - special motor, Protection class is IP55, The Insulation class F, Axial fan with the Aluminum alloy blade. Start directly.
2. The heat Exchange tube material is T2 deoxidation,deacidification, high quality copper tube or the SUS 304, 316L tube. grading and pressure test three times to ensure the closeness.
3. Water pump, we use the specifical cooling tower water pump, the small volume, light weight, silent mode design.easy maintance and long life.
4. Drift eliminator, PVC material drift eliminator change the Airflow direction three times, recycling the steam utmost to save water. It is easy repalce.
5. Air inlet, PVC material, large air volume, small Wind resistance, can prevent the Floating debris enter the Closed cooling tower.
6. Spray system. The spray nozzle is most important, it can ensure the water sprayed on heat exchanged tube evenly.
7. Control system, we will provide the control system in each closed cooling tower.
8. Auxiliary Machine, SS water tank, the water pump,
