
Add to Cart
Air Cooling And Water Cooling Evaporative Condenser For Cold Room And Cold Store
YZT-1840F Specifications |
Heat Reject :1840 kw |
Gas Filling Rate :212 kg |
Power of fan :4× 4.0 kw |
Blowing rate: 4× 45000 m3/h |
Spray Pump’s Delivery Lift :10 m |
Spray Pump’s Power : 4.0 kw |
Spray Water Flow Rate : 180 m3/h |
Drift Loss : ≤0.001% |
Design Pressure: 1.98 Mpa |
Tested Pressure: 2.5 Mpa (Pneumatically tested 3 times @ 2.5 Mpa) |
Operation Work Pressure: 0.15—0.45 Mpa |
Inet/ Outnet: 2*DN 100mm/ 2*DN 100mm |
DN100:Liquid outlet (Please specify adopted screw standards) |
DN100:Air inlet (Please specify adopted screw standards) |
Compensation water pipe: DN 25 mm |
Discharge pipe: DN 50 mm |
Overflow pipe: DN 80 mm |
Shipping Weight: 8830 kg |
Operating Weight:14730kg |
7460mm×2200mm×4730mm (L*W*H) |
Closed type stainless steel Ammonia evaporative condenser ,It is the type of cooling tower placed the heat exchange tube inner the tower to the then ensure the cooling effect by circulation of air, spray water and circulating water. Spray water wraped around the heat exchange tube, the heat of the water inner tube is transfered to the spary water throught the wall of Heat exchange tube and Forming steam, the steam is discharged by fans. Almost Steam is recycling by drift eliminator , Re-condense into water and flow into the water channel. The filling cooling the spary water twice time , impoved the cooling effect and reduce the Scaling in outer wall of heat exchange tube.It can ensure the water can't be pulluted because of the close circulation and protect well the main equipment 's efficient operation and improve the service life. If the low temperature outside, can stop spray water system to save water, Closed cooling tower in the iron and steel metallurgy, power electronics, mechanical processing, air conditioning systems and other industries, Aerospace, electronics, instrumentation, textile, refrigeration unit, casting, forging, quenching liquid, melting furnace, mold, continuous casting machine, rolling mill, heating furnace, electric arc furnace, central air conditioning, heat pump, air compressor, hydraulic oil Machine and other fields have been widely used.
If the cooling raw material not water, not oil , is the Refrigerant and The refrigerant enters the cooler in the form of a high temperature gaseous state for heat exchange, the closed cooling tower named the Evaporative air cooler.